You are here: Home > _Accessories > Mod Parts and Accessories
Parts and accessories for The Precise, The Darwin and other non-standard or exclusive devices.
Sort By:
SAMSUNG INR21700-30T 3000mAh 35A High-drain Battery Golisi S30 IMR 18650 3000mAh High-drain Battery - 35A - 7 Points Vpdam Rebuildable Folding Tool Kit - Blue - 4 Points

The Samsung INR21700-30T High-drain Li-ion Battery is a high performance 21700 battery used for powering vaping mods and other electrical devices. It supports 35A high discharge current and 3000mAh battery capacity. Just get the Samsung INR21700-30T battery and enjoy safer vaping.

Parameters

Size: 21700 (21.1mm diameter x 70.2mm long)

Type: Li-ion INR (Rechargeable)

Rated Capacity: 3000mAh

Continuous Discharge Rating: 35A

Protected: No

Style: Flat Top

Nominal Voltage: 3.6V

It comes with

1x SAMSUNG INR21700-30T High-drain Li-ion Battery 35A 3000mAh

Golisi G30 IMR 18650 3000mAh High-drain Battery is the high-performance rechargeable lithium battery, made for high discharge current (max.35A) applications, more than enough to run any high drain (high discharge current) device. The internal protection sheets help to provide a safe charging and discharging environment to the battery. It is widely used in vaping gears, portable flashlights, home tools, toys, camera and other electronic devices.
Parameters
  • Capacity: 3000mAh
  • Voltage: 3.7V
  • Max discharge current: 35A
  • Energy density: Volumetric: 567 Wh/l, Gravimetric:194 Wh/kg
  • Charging current: max 2A
  • Charging temperature: 0 - 45 Celsius
  • Discharging temperature:-20 - 60 Celsius
  • Storage temperature: -20 - 50 Celsius

It comes with
1 x Golisi G30 IMR 18650 3000mAh High-drain Battery

Features

  • 3000mAh high capacity with excellent performance
  • 35A high constant discharge current
  • Rechargeable more than 500 times
  • Internal protection sheets to avoid over-discharging and over-charging
  • Hard-wearing wrap to avoid short circuit
  • Safe and environment-friendly


    Safety Tips
Li-ion Batteries may explode if you do not charge or discharge them properly. Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts.
Users must have knowledge on how to charge and discharge Li-ion batteries before making Li-ion Battery Packs. We are NOT responsible for any damage that is caused by the misuse of Li-ion Batteries.
It is not a protected battery.
Packed inside this bag is some simple useful vape tools necessary for DIY vapers to build coils and adjust their atomizers and other vaping devices. And this tool bag is ruggedness and makes it highly compatible with tough environment.

Brand: Vpdam

Size: 153mm*75mm*34mm

Each set contains:
1pc Cut Pliers
1pc Screwdriver
1pc Folding Scissors
1pc Ceramic Tweezers
1pc Coil Jig
1pc Alien Key
Sony VTC5A 18650 - 2600mAh 35A High-Drain Li-ion Battery - 8 Points Coil Jig and Precision Screwdriver Set by Geekvape - 9 Points Multi-functional Ceramic Tweezer V8 - 3 Points

The Sony VTC5A 18650 is a high performance 2600mAh rechargeable lithium battery with 35A high constant current applications. The VTC5A 18650 is enough to run various high drain devices. Compared to traditional batteries, it is more powerful, safer and economic to use. Best choice for you!

Parameters

Model: 18650
Capacity: 2600mAh
Constant Current: 35A
Nominal Voltage: 3.7V
Apply to: e-cig MODs, flash lights, toys

GeekVape Coil Jig & Precision Screwdriver Set is made of stainless steel, is very useful for DIY. This set comes with screwdrivers in different lengths and different types. Very convenient to use. Get it and have more fun in DIY!


Parameter
Material: Stainless steel

Type & Size
Cross: 1.8mm, 2.0mm, 2.4mm, 3.0mm, 3.5mm
Straight: 1.0mm, 1.2mm, 1.4mm, 2.4mm, 3.0mm
Hexagonal: 1.5mm


It comes with
1 x GeekVape Coil Jig & Precision Screwdriver Set

This multifunctional vape tweezer has ceramic tips for adjusting your wick or coil even when its hot. The circular grips are great for screwing or unscrewing your atomizer.

Caution: do not use excess force on the tip when contact with heat. Ceramic might crack and shatter. Wearing protective glasses is recommended.
Pinwheel Hand Spinner Fidget Toy - Purple - 7 Points IJOY 20700 3000mAh High Drain Rechargeable Battery - 40A - 13 Points Coil Master DIY Coiling Kit V3 - 14 Points
Pinwheel Hand Spinner Fidget Toy - Purple - 7 Points
Our Price: CAD $19.99
Sale Price: CAD $9.99
**Not Eligible for Free Shipping, Discounts or Coupons
The Pinwheel Hand Spinner Fidget Toy is a small spinning device designed to keep your hands busy and your mind focused. It is pocket sized and can be spun in one hand by using the other hand to rapidly spin it from small continuous strikes. Great for people with Fidgety hands, ADHD, Anxiety & OCD sufferers.

Specifications:

Length 5.000cm
Width 5.000cm
Height 1.500cm
Weight 0.104kg

Features:
  • High-Performance Bearing and 5 Minutes Average Spins!
  • Small enough to carry in your pocket every day, Perfect size for adults and kids
  • Simple, Discrete and Fun to play everywhere, effective for focus and deep thought
  • Great For Fidgeters, Anxiety Relief, Focusing, ADHD, Autism, Quitting Bad Habits, Staying Awake and Killing Time.


Package included:
1 x Pinwheel Shape Fidget Spinner

Product Introduction
IJOY 20700 High Drain Rechargeable Battery comes with 3000mAh battery capacity with 40A max continuous discharging current. It can be used with most 20700 regulated and mechanical MODs. Long storage life, light weight and high energy density. Get it as a spare part.
Parameters
Name: 20700 Battery
Size: 20.4mm (D) x 70.1mm (L)
Type: Li-Ni (High Drain)
Rated Capacity: 3000mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Cut-off Voltage: 2.5V
Rechargeable: Yes
Max Continuous Discharging Current: 40A
Max Pulse Discharging Current: 85A
Style: Flat Top

It comes with
1 x IJOY 20700 3000mAh High Drain Rechargeable Battery - 40A


The newly updated Coil Master V3 has an improved design for better performance. With six different sized Coiling Poles, the Coil Master is perfect for almost any vaper using RBAs or RDAs, simply pick your width, thread your wire through the hole on the base, place the top cover onto the pole and twist. One perfect coil, no fuss.

New features
  1. Updated larger size jig for a more ergonomic fit in your hand
  2. Longer pole for easy coil alignment
  3. Easy coiling in two directions Clockwise or anti-clockwise coiling

Package Contents
1 x Diagonal pliers
1 x Needle-nose pliers
1 x Stainless steel folding scissors
1 x Pen styled Phillips screwdriver
1 x Pen styled Flathead screwdriver
1 x Ceramic Tweezer (T1)
1 x Elbow Tweezer (T3)
1 x 30ft 24GA Kanthel A1 wire
1 x 521 Mini Tab
1 x Coiling Kit V4
1 x Silicon rubber case for jigs
1 x T styled HEX screwdriver (?1.25mm, ?1.5mm, ?2.0mm)
3 x Japanese Organic Cotton
LG - HG2 18650 3000mAh Li-ion Battery - 20A/35A - 7 Points Coil Jig By UD Youde Technology - 8 Points Efest 18650 Silicone Case
There's a note on the cover of the battery:
*Use for battery pack maker(s)/ system integrator(s) only.
*Online e-commerce sales, sales to individual consumer, or sales for e-cigarette use are strictly prohibited.

LG HG2 18650 Li-ion batteries have a high capacity of 3000mAh and can support a maximum load of 35A, making it perfect for low sub-ohm resistance vaping on your favorite mod.

Specifications:
  • Nominal Capacity: 3000mAh
  • High Drain: 20A constant current, 35A pulse current load
  • Nominal Voltage: 3.6V
  • Full charge Voltage: 4.2V
  • Diameter: 18.3 +0.2/0.3 mm (Max. 18.5 mm)
  • Height: 65.0 0.2 mm (Max. 65.2 mm)
  • Operating Temperature (cell surface): Charge 0 ~ 50?, Discharge -20 ~ 75?
  • Positive terminal: Flat top
  • Size:18650 (Cylindrical)

Package Includes

1 x LG HG2 18650 3000mAh Li-ion Battery - 20A

Safety Tips
Li-ion Batteries may explode if you do not charge or discharge them properly. Please note that due to their inherent safety, IMR cells don't have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts.
Users must have knowledge on how to charge and discharge Li-ion batteries before making Li-ion Battery Packs. We are NOT responsible for any damage that is caused by the misuse of Li-ion Batteries.
It is not a protected battery.
The UD Coil Jig set is a well engineered Coil Winding set made of Solid Stainless Steel with an amazing and clean finish. You can wind any type of vaping wire into your own to use coils with the easy use of this kit.

This Product Features:
Stainless Metal Jig
6 Size Attachments
Create Coils of Sizes: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 mm

You Will Receive:

1x - Main Bar
6x - Size Attachments
1x - Carrying Case
The Efest 18650 Battery Silicone Case is a case that holds a single 18650 battery. It comes in 4 different colors as white, purple, yellow and blue. The Efest 18650 Silicone Case prevents your 18650 battery from shorting out and protects it from overheating and wear and tear.
Kayfun Bell Cap Kit - 6 Points Mod Case The Kick clone - A Power Regulated Drop-in Module for Mechanical Mods - 8 Points
Kayfun Bell Cap Kit - 6 Points
Our Price: CAD $9.99
Sale Price: CAD $3.99
**Not Eligible for Free Shipping, Discounts or Coupons
An acrylic bell cap replacement for your Kayfun.
Free up your pockets! This soft mod case can hold a fully assembled devise or e cig. Made from a soft and plush material, it will protect it from falling and scraching. The larger size can hold multiple devises and e liquid bottles, simply zip it up and go! a perfect accessory and a must for any vaper.

Features:
-zipper
-plush interior
-belt clip

The Kick clone is designed to be used in an 18650 Device substituting an 18500 IMR High Drain battery that allows you to adjust the watts and control the heat of your atomizer or cartomizer!
Kayfun Lite Clone Insulator Kit - 1 Points Kayfun Lite Clone Coloured Tank Section Kayfun Lite Clone Nano Kit (Type A) - 3 Points
Kayfun Lite Clone Nano Kit (Type A) - 3 Points
Our Price: CAD $8.99
Sale Price: CAD $2.99
Replacement insulators for the Kayfun Lite clone. Replacement colored clear plastic tank section for the Kayfun Lite RBA clone. Shrink your Kayfun Lite Clone down to a more stealthy size and weight with this conversion kit.
Step Mandrel - 6 Points Efest LiPo Safety Charging Bag - Large XTAR Charger Spacer
Step Mandrel - 6 Points
Our Price: CAD $7.99
Efest LiPo Safety Charging Bag - Large - 5 Points
Our Price: CAD $11.99
Sale Price: CAD $4.99
XTAR Charger Spacer
Our Price: CAD $0.99
Steel mandrel with small size levels make wrapping coils a breeze. Simply form wire around the notch in your desired size and squeeze ends together. **Not Eligible for Free Shipping, Discounts or Coupons
The Lipo-Guard is a fireproof bag, designed to stop and contain the fire caused by incorrectly or poorly functioning lithium batteries, especially during charging. It is made from a fiberglass woven fabric, similar to fireproof suits worn by firefighters. It is highly recommended to charge your Lithium Ion batteries inside of a LiPo safety bag. Batteries can fail, when they do it normally causes venting and sometimes fire. This bag will prevent flames from escaping and allow for venting so all you see is smoke.


LIPO-GUARD Bag Use Instructions:

  • Insert batteries into charger making sure polarity is correct.
  • Place charger in the bag towards the bottom.
  • Place Li-Po Bag on non-flammable surface.
  • Place the charger leads through the space (left or right seam) at the top of the bag.
  • Close top flap of Li-Po Bag and press, ensuring the seal is secure.
  • Charge battery using proper charging practices.
  • Never leave charging battery unattended.
NEW fit shorter batteries on your Xtar charger.
Drip Shield Cone - 8 Points VapeMate Electronic Cigarette Juice Feeder by Super-T
Drip Shield Cone - 8 Points
Our Price: CAD $10.99
Sale Price: CAD $4.99

(1)
  Use this drip shield cone to avoid the mess when dripping.  

Exclusive! The VapeMate Electronic Cigarette Juice Feeder in a variety of colours!  Attach a bottle to your favourite 510/901 atomizer on your battery of choice and just squeeze the bottle to drip juice right into your atomizer!